找回密码
 注册
查看: 95193|回复: 19

AVHzY CT-2 Download Manuals Firmware PC software V1.79.6(8-2-20)

[复制链接]

15

主题

12

回帖

306

积分

Administrator

积分
306
发表于: 21-01-2018 20:19:34
| 显示全部楼层 |阅读模式
banner.jpg

Shop now
AVHzY Store / Amazon US / Amazon CA / Amazon JP

Telegram group  https://t.me/avhzy

— Firmware Upgrade —
1.Remove the meter from power sources,press and hold the left key and plug it into a PC, release the key when the device entered”Bootloader” mode.
2.Drag the firmware intothe poped up disk on PC.  such as “Kotomi Vx.xx.KotomiPremium”
3.Wait for a few seconds, the meter will reset automatically, and pop up a dialogue”Updgrade Success”, firmware upgrade done.

— Update Failure Procedure —
1.If after about 10 seconds,the device shows “Firmware Verification Failed”.
2.Please replug the USB cable.
3.Click “Firmware Update” button again (A “Waiting for device” window is normal,ignore it)

AVHZY CT-2 App.ZIP (11.58MB)  AVHzY-CT-2-Manuals-EN.PDF (3.68MB)

— History Versions —
https://drive.google.com/open?id=1wzdOJ78Xi_gW3Ro9kkmVjaxp_k0OeVRw

V1.79.6 Build 20208
1.(Fix)Fixed failure to request QC3.0 problem in MFI test in previous update.

V1.79.5 Build 191002
1.(Fix)Changed separator "," into ";" when German culture is present.

V1.79.4 Build 190622
1.Change in firmware only.

V1.79.3 Build 181227
1.Change in firmware only.

V1.79.2 Build 180803
1.(New)Each individual curve's color can be changed.
2.(New)Each individual curve can be hidden.

V1.79.1 Build 180521
1.(New)Added customer config files.
2.(New)Added energy proportion graph.
3.(Fix)No more unit in *.CSV export files.
V1.79.2 Build 180803
1.(New)Each individual curve's color can be changed.
2.(New)Each individual curve can be hidden.

V1.79.0 Build 18-1-1
(Major version update, read carefully)
1.(New)Added software support for internal dummy load, which is available for hardware version V1.02+, it's used when:
  --During auto enumeration, this prevents the unexpected power cutoff by No-Load detection inside the powerbanks.
  --A new cable resistance test mode called "Bypass Load-Free" is added.
  --During triggering VOOC/DASH, it's no longer needed to plug in an extra load.
2.(New)Added new cable resistance test mode "Bypass Load-Free", using  internal dummy load for the test (If hardware version is V1.02+), bringing  much more convinience to get the resistance of cables.
3.(New)Added VOOC/DASH trigger fearture for the latest generation of  VOOC/DASH chargers, voltage adjustable from 3.2V to 5V, with precision 20mV.
  Hint1: While using the fearure, for devices with hardware version below  V1.02, an external load with current more than 0.2A is needed.
  Hint2: This feature is unable to trigger constant-current mode VOOC/DASH protocol which is used in older VOOC/DASH versions.
  Hint3: Since the charger will detect the availability of the stock cable,  please use the stock cable when using this feature.
4.(New)Added E-mark info reader(Available only for hardware V1.02+), breif manual:
   1.Make sure the PD tester switch is switched on.
   2.Power the meter with power sources which will not occupy ANY type-C ports(An independednt 5V supply is recommended).
   3.Enter fast-charge trigger menu, select "E-mark info reader",
   4.Plug in the cable being tested, data and its breif analysis will be  displayed on the screen. Hot-Plug is supported in this mode.
   5.(New)Added trigger/recognize/auto enumeration feature for Samsung AFC-12V.
   6.(New)Added fahrenheit support for temperature display, it can be enabled in Main Menu->Screen Settings.
   7.(Fix)Fixed AFC/FCP protocol trigger failure on certain ICs.
   8.(Optimize)Normalized BC1.2 detect procedure.
   9.(Edit)Protection threshold is set to 7.1V instead of 6.7V in Apple MFI test, this fixes wrong fake result for newest generation of MFI cables.
  10.(Edit) Bold font is no longer available.
  11.(Optimize)Optimized PD listener related codes for heavy traffic conditions.
(Hint1: The firmware will handle differences among hardware versions  automatically)
(Hint2: The hardware version can be seen in bootloader mode)
(Hint3: Since a hardware edition is applied, a new manual V1.02 is provided)

V1.78.4 Build 17-10-31
1.(Edit)Edited auto detect(enumerate) UI for better experience.
2.(Fix) Fixed SCP auto detect problem on certain chargers.
3.(New)Added information for a new customer.
4.(Optimize)Optimized something user would not care about.

V1.78.3 Build 17-10-9
1.(New)Added full Japanese support.

V1.78.3 Build 17-10-6
1.(New)Added theme customization to software.

V1.78.2 Build 17-10-5
1.(Fix)Fixed bugs in logo customization when the image doesn’t use all 256 palettes.
2.(Fix)Small adjustments applied to temperature compensation to current measurement.

V1.78.1 Build 17-10-4
1.(New)Added logo customization and startup delay in software.(Logo/amazon.bmp)
2.(Fix)Fixed absent minimize button on some systems.

V1.78 Build (2017-10-1)
1.(New)Add SCP item to auto detect routine.
2.(Fix)Fixed not-responding problem when the PC software tries to get screenshot while the device is on diagram painting screen.
3.(Optimize)Optimized temperature, D+, D- reading stabablity.
4.(Optimize)Optimized PD trigger routine, for better compability.
5.(Optimize)Optimized PD listener timestamp accuracy to 1ms.

V1.77 Build (2017-9-24)
1.(New)Some modifications for new features of the PC software.
2.(New)Added support to PD3.0, added trigger feature to QC4.0/PPS (based on PD3.0).
3.(New)Added trigger feature for Huawei SCP.

V1.76 (2017-9-8)
1.(New)Added screenshot function for PC software.
2.(New)Added selectable home screen refresh rates to settings.
3.(New)Added info for a new customer.

https://youtu.be/k49dqFIp9mM






























AVHZY CT-2 App V1.79.6 Build 20208.zip

11.54 MB, 下载次数: 11203

AVHzY-CT-2-Manuals-EN V1.03(2019-1-25) .pdf

3.65 MB, 下载次数: 6828

回复

使用道具 举报

15

主题

12

回帖

306

积分

Administrator

积分
306
 楼主| 发表于: 22-01-2018 16:41:36
| 显示全部楼层
---Firmware Updata---
1.
upl.png
2.
2.jpg
3.
ud2.png
4.
ud3.png
5.
ud4.png
6.
ud5.png END




回复

使用道具 举报

0

主题

1

回帖

28

积分

Member

积分
28
发表于: 19-02-2018 10:07:47
| 显示全部楼层
Hello
I have this meter bought from Amazon in the end of last year .
How can I get these silver side ?
There is some new hardware version from November last year ???
Thanks
回复

使用道具 举报

15

主题

12

回帖

306

积分

Administrator

积分
306
 楼主| 发表于: 26-02-2018 21:36:25
| 显示全部楼层
catavhzy 19-02-2018 10:07
Hello
I have this meter bought from Amazon in the end of last year .
How can I get these silver side ...

Hello
catavhzy
The silver one is on sale all the last year on amazon in Europe, and already is the newest version. Could you tell us your order id and we can have a check?
回复

使用道具 举报

0

主题

2

回帖

10

积分

Newbie

积分
10
发表于: 27-02-2018 01:16:09
| 显示全部楼层
10.(Edit) Bold font is no longer available.


return the bold font. Please!
回复

使用道具 举报

1

主题

45

回帖

207

积分

Moderator

积分
207
发表于: 28-02-2018 05:30:43
| 显示全部楼层
alexgsmaster 27-02-2018 01:16
return the bold font. Please!

New features rushed into 1.79.0, ROM space is not enough so we cut the bold font off
回复

使用道具 举报

0

主题

2

回帖

8

积分

Newbie

积分
8
发表于: 21-05-2018 08:09:53
| 显示全部楼层
Something's wrong with 1.79.1.  I have tried to upgrade my CT-2 running 1.79.0 both ways (from software and manual method) and it gets stuck doing this:

Bootloader(KotomiPre)
HW_Ver: V1.03
SW_Ver: V1.79.0

Upgrading...
134 -> 134

And it just sits there and does nothing.  When I disconnect, it says:

Bootloader(KotomiPre)
HW_Ver: V1.03
SW_Ver: V1.79.0

Firmware verification
failed!!


The new firmware is named "fw.KotomiPremium", but the old firmware is named "Kotomi V1.79.0.KotomiPremium".

I can successfully re-load the older firmware, but I can't upgrade to the new firmware.
回复

使用道具 举报

1

主题

45

回帖

207

积分

Moderator

积分
207
发表于: 21-05-2018 21:03:44
| 显示全部楼层
Sonartech 21-05-2018 08:09
Something's wrong with 1.79.1.  I have tried to upgrade my CT-2 running 1.79.0 both ways (from softw ...

Sorry, that's  our mistake.

New firmware updated, name corrected.

点评

Hi I have just bought this and I will receive this tomorrow. I downloaded the firmware update package, however the firmware name still "fw.KotomiPremium" in the extracted files folder. Am  详情 回复 发表于 31-07-2019 14:25
回复

使用道具 举报

0

主题

2

回帖

8

积分

Newbie

积分
8
发表于: 22-05-2018 10:48:50
| 显示全部楼层
Yep, that fixed it!  Upgrade works via software and manual method.  Thanks very much for such a fast turnaround!  This product is awesome!  
回复

使用道具 举报

0

主题

1

回帖

6

积分

Newbie

积分
6
发表于: 22-07-2018 13:36:11
| 显示全部楼层
I realize this is probably a stupid question but just thought I'd ask just in case, but I'm assuming that the CT-2 firmware update (with the majority of cool new features) will not work on the CT-1 usb tester? I understand that the CT-2 is a new tester and probably has different hardware but just thought I'd check at least, because when I was looking to buy a usb tester around 6 months ago the CT-2 wasn't out yet and I wound up getting the CT-1. It's a great tester so I'm not just trying to complain or anything but when I bought it I was under the impression that the firmware would be updated with new features over time, so now I'm just wondering if development is going to stop for it now that the CT-2 is out because if that's the case I guess I bought mine 6 months too early . Thanks
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archive|手机版|小黑屋|AVHzY Forum

GMT-8, 03-12-2023 10:04 , Processed in 0.114855 sec., 19 queries .

Powered by Discuz! X3.5

© 2001-2023 Discuz! Team.

Release 20231001, © 2001-2023, Tencent Cloud.

MultiLingual version, Rev. 4300, © 2009-2023 codersclub.org

快速回复 返回顶部 返回列表