Jager 发表于 28-01-2018 08:41:14

How to Test Cable Resistance

I see in the manual that you are able to test the resistance of a cable but I do not see the option on the meter itself. Where can I find the option for the resistance test?

Also how do I determine which hardware revision of the meter I have?

Thank you.

yanke928 发表于 29-01-2018 18:58:51

Long press the left key to enter cable resistance mode.

You can see the hardware version in bootloader, which can be entered by pressing and holding left key while start-up.

alexw 发表于 10-09-2018 22:51:00

I've successfully tested USB-C cables, but is there a way to test usb Micro B cables? Also, where do I find the adapter for 4-wire measurements (or even any info on how it's supposed to work - I'd be happy to make my own).

timotv 发表于 23-02-2019 03:20:43

Could you make manual with pictures how to test cables step by step? I don't understand where do I have to connect the cable ...

timotv 发表于 23-02-2019 03:31:07

Every time I connect the tester to power supply I see the page(screen) "Hint", look the photo.


How to reset the tester to get default screen after powering on ?

yanke928 发表于 27-02-2019 04:43:22

In the cable resistance result screen, double click the middle key to go to the default screen and it will not enter cable resistance test on startup again.

timotv 发表于 02-03-2019 09:01:16

static/image/common/user_online.gif yanke928 static/image/common/clock.gif 27-02-2019 04:43
In the cable resistance result screen, double click the middle key to go to the default screen and i ...

Thanx! Could you help with my problem posted in my previous post ?

timotv 发表于 05-03-2019 21:16:14

static/image/common/user_online.gif yanke928 static/image/common/clock.gif
Could you make manual with pictures how to test cables step by step? I don't understand where do I have to connect the cable ...
页: [1]
查看完整版本: How to Test Cable Resistance