timotv 发表于 23-02-2019 03:15:57

PD Listener

I press "PD Listener" button in the programm "KotomiApp.exe" but nothing happens:

yanke928 发表于 02-03-2019 19:52:56

Please read the manual carefully.

Here's the brief: Move the PD switch to ON position. Enter PD listener. Plug-in a PD charger with C-C cable to Type-C in port. Plug-in a PD load with C-C cable through Type-C out port, PD communications will be shown on the programme.

timotv 发表于 03-03-2019 10:04:19

Отредактировано: timotv, 03-03-2019 10:38

>Please read the manual carefully.
There is nothing stated about connection of the tester to charger and load (where/which port? ) in the manual.

>PD charger with C-C cable to Type-C in port

Can I connect the tester to the PD charger via "USB-A in" ?


timotv 发表于 04-03-2019 09:51:56

Отредактировано: timotv, 04-03-2019 10:47

I connected charger and loader to Type-C in and Type-C out as you told and PD Listener activated. Why PD Listener doesn't work when PD charger is connected via "USB-A in" connector?

But PD Listener doesn't show messages on the CC line. Look the video please:
https://youtu.be/x1Bh0z5QxTM


yanke928 发表于 05-03-2019 00:26:05

static/image/common/user_online.gif timotv static/image/common/clock.gif 04-03-2019 09:51
Отредактировано: timotv, 04-03-2019 10:47

I connected charger and loader to Type-C...

Obviously it won't show any messages.PD is only capable on Type-C devices, a simple load won't communicate and uses default 5V power only. For more information, please look up in Power Delivery specification.

timotv 发表于 05-03-2019 21:12:47

Отредактировано: timotv, 21-06-2019 12:15

>simple load won't communicate
Yes, you are right. ZKE EBD-USB doesn't have PD trigger. More over charger Tronsmart U5PTA doesn't support PD, it supports QC3.0 only.
页: [1]
查看完整版本: PD Listener