cdw3423usbpd 发表于 03-12-2019 17:43:16

14mA Current shown with no load connected

When I power my CT-2 using the USB-C input it shows there is a current draw of about 14mA even though there is no load connected.Is this showing the power the CT-2 uses, or is it an error?If I power the device with the Male USB-A connection or the Micro USB-B port, this does not happen.

Crhis W

AVHzY 发表于 04-12-2019 21:53:15

Hello
This is normal .
页: [1]
查看完整版本: 14mA Current shown with no load connected